Magnavox MC13D1MG User manual, English (US) - Page 41

Automatic Operation Features

Page 41 highlights

MC13D1MG 3/22/02 1:26 PM Page 41 Automatic Operation Features 41 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape's record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing. Automatic Rewind, Eject, Off When you play, fast forward, or record a tape to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. Tape Eject A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape cannot be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording. Automatic Tracking Adjustment The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually, press the CHANNEL v/w buttons on the TV/VCR or the CH(annel) v/w button on the remote control during playback. Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/w button is pressed. Before Tracking Adjustment After Tracking Adjustment

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Automatic Operation Features
41
The following playback features will always operate.
Automatic Playback
When you put a tape in the TV/VCR, the power will come
on automatically.
If the tape
s record tab is missing, playback
will begin. If a timer recording is set, the power will not
come on automatically when you insert a tape with the
record tab intact. If a timer recording is set and the TV/VCR
power is off, the TV/VCR will eject the tape if the record
tab is missing.
Automatic Rewind, Eject, Off
When you play, fast forward, or record a tape to its end,
the TV/VCR will rewind the tape, stop, turn itself off, and
eject the tape.
Tape Eject
A tape can be ejected with the TV/VCR power on or off
(but the TV/VCR must be plugged in).
If a timer recording is
programmed, a tape cannot be ejected when the power is
off.
Turn on the TV/VCR power, then eject the tape.
Be
sure to insert a tape and turn off the TV/VCR power for the
timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you
the best possible picture quality.
With some recordings,
however, you may get a better picture using the manual
tracking controls (see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL
/
buttons on the TV/VCR or the CH(annel)
/
button on
the remote control during playback.
Tracking returns to Automatic Tracking Adjustment when a
tape is inserted or when the STOP/
button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
MC13D1MG
3/22/02
1:26 PM
Page 41