Magnavox MSH318 Owners Manual - Page 17

3. More than one alarm can be set, repeated the same procedures until all alarms are set. IMPORTANT: When using the Alexa alarm clock (or timer), make sure the Clock is in power on mode and connected to the Wifi network and Amazon continually. Otherwise, the alarm will not function. Snooze: When alarm goes off, press the SNOOZE Button, the Indicator Bar will illuminate and blink. The alarm will turn back on automatically nine (9) minutes later. This feature can be repeatedly until the Alarm is turned off. Shut off alarm: When alarm goes off, press and hold the SNOOZE Button to shut off alarm. The indicator "alarm1" will disappear on the display. Cancel alarm: In Wifi connection mode, say "Alexa" to the microphone or press the " " Microphone Button, the Indicator Bar will illuminate. Then, ask Alexa to:  (Alexa) Cancel alarm.  Alexa will reply: XX alarm cancel.  If more than one alarm time was set, cancel it following her instructions. RADIO: 1. Press and hold the " " Power Button approximately 1 second to turn on the clock from standby mode. Indicator " " will appear on the display and you will hear an audible prompt say "Power on; Wi-Fi mode". 2. Press the "Source" Button repeatedly until the indicator "radio" appears on the display. 3. In first time use (or relocated the Clock to a new location), search and store the available FM stations by pressing the "FM SCAN" Button. The Clock will automatically search and store all available FM radio stations then play the first stored FM station. 17