Magnavox MWD200GA Owners Manual - Page 7

Setup Connection to an Audio System Playing 2 channel audio AUDIO Stereo system Analog audio input jacks L R This unit Audio cable (supplied) AUDIO OUT (Analog) L R AUDIO OUT Rear Terminals Playing Dolby Digital (Multi-channel audio) Dolby Digital decoder, MD deck or DAT deck COAXIAL Digital audio input jack Audio Coaxial Digital cable (commercially available) DIGITAL AUDIO OUT DIGITAL AUDIO OUT COAXIAL Connection Setting SETUP > AUDIO> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to the other equipment (an MD deck or DAT deck etc.) without Dolby Digital decoder. PCM * To complete these settings, refer to pages 14-15. Hint • The audio source on a disc in a Dolby Digital Multi-channel Surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi-channel Surround sound as heard in the movie theaters. • Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. 12 34 S-VIDEO OUT L DIGITAL AUDIO OUT R VIDEO AUDIO COAXIAL OUT OUT 1 S-VIDEO OUT jack Connect an optional S-Video cable here through the S-Video in jack of a television. 2 VIDEO OUT jack Connect the supplied yellow video cable here through the video in jack of a television. 3 AUDIO OUT jacks Connect the supplied audio cable here through the audio in jacks of a television or other audio equipment. 4 DIGITAL AUDIO OUT COAXIAL jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. - 7 - EN