Magnavox MWD200GA Owners Manual - Page 9

Functions Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit. Playback Before: Turn on the TV, amplifier and any other equipments which are connected to this unit. Make sure the TV and audio receiver (commercially available) are set to the correct channel. 2 ( ) ⇒Page 10 1 Press [STANDBY-ON] to turn on the DVD/CD Player. 2 Press [OPEN / CLOSE A] and insert a disc with label facing up. 2 1 STANDBY-ON DISPLAY OPEN/CLOSE SEARCH MODE AUDIO 1 2 3 SUBTITLE 4 5 6 ANGLE 7 8 9 REPEAT CLEAR 0 +10 A-B PAUSE SKIP 3 Press [PLAY B] to start playback. 3 4 Press [STOP C] to stop playback. 4 SLOW PLAY REV FWD STOP Lights up when power is on. OPEN/ CLOSE PLAY STOP IR 2 23 4 1 Hint • When you play an MP3-format disc, details on page 10. • A "prohibited icon" may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. • Some DVDs may start playback from title 2 or 3 due to specific programs. • During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction. TIP: You can change the On-Screen language in "PLAYER MENU" setting. (Refer to page 14.) Functions DVD menu Fast Forward / Reverse Search Some discs contain menus which allow you to customize DVD playback. Use [K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]). Calling Up a Menu Screen during Playback • Press [MENU] to call up the DVD menu. • Press [TOP MENU] to call up the title menu. Hint • Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details. Resume Press [STOP C] during playback. Resume icon will appear at the top-left on the TV screen. Press [PLAY B], playback will resume from the point at which playback was stopped. R.STOP Hint • To cancel resume, press [STOP C] one more time in the stop mode. • The resume information will be kept even when unit is in standby mode. For MP3, playback will resume from the beginning of the track at which playback was stopped. Paused and Step-by-Step Playback Use [FWD g] or [REV h] repeatedly during playback to select the required forward or reverse speed. E 1 To continue playback, press [PLAY B]. Hint • Fast forward or reverse search speed is different depending on the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and 5(x32). Slow Forward Search Press [FWD g] repeatedly in the pause mode to select the required forward speed. 1 To continue playback, press [PLAY B]. Hint • Slow forward speed is different depending on the disc. Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2). • Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in the slow playback mode are blurred. (Refer to pages 14-15.) • The reverse of slow playback is not available. Zoom 1) Press [ZOOM] repeatedly during playback to select the required zoom factor: x2, x3, x4, x1/2 or OFF. x2 x3 x4 x1/2 Press [PAUSE F] during playback. To continue playback, press [PLAY B]. PAUSE The disc goes forward by one frame each time [PAUSE F] is pressed in the pause mode. To continue playback, press [PLAY B]. Hint • Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in the pause mode are blurred. (Refer to pages 14-15.) 2) Use [K / L / s / B] to slide the zoomed picture across the screen. 3) To exit zoom function, press [ZOOM] repeatedly to select OFF. Hint • Zooming function does not work while the disc menu is displayed. • Some part of the picture may not be zoomed depending on the disc or playback status. - 9 - EN