Makita BBX7600 Owners Manual - Page 27

Miscellaneous Items Used in Above Systems

Get Makita BBX7600 PDF manuals and user guides View all Makita BBX7600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

(3) Ignition System (i) Spark Plugs. (ii) Magneto or electronic ignition system. (iii) Spark advance/retard system. (4) Miscellaneous Items Used in Above Systems (i) Hoses, Sealing gaskets, belts, connectors, and assemblies. Makita USA, Inc will furnish with each new engine written instructions for the maintenance and use of the engine by the owner. (e) MAINTENANCE STATEMENTS It is your responsibility to have all scheduled inspection and maintenance services performed at the times recommended in the 2007 and later Owner's Manual and to retain proof that inspection and maintenance services are performed at the times when recommended. Makita USA, Inc will not deny a warranty claim solely because you have no record of maintenance; however, Makita USA, Inc may deny a warranty claim if your failure to perform required maintenance resulted in the failure of warranted part. The proof, which you maintain, should be given to each subsequent owner of the engine. You are responsible for performing the scheduled maintenance described below based on the procedures specified in the 2007 and later Owner's Manual. The scheduled maintenance below is based on the normal engine-operating schedule. PROCEDURE 1) Clean engine and check bolts and nuts. Retighten if necessary. 2) Check and refill engine oil (4stroke engine only) 3) Change engine oil (4stroke engine only) 4) Check clogging of cooling air passage and cylinder fins. Remove and clean if necessary. 5) Clean air cleaner. 6) Check spark plug. Clean and adjust if necessary. 7) Check muffler exhaust outlet(or port). Clean if necessary. 8) Check fuel filter. If clogged, replace with new one. 9) Adjust valve clearance, if applicable (4stroke engine only). 10) Replace fuel lines. 11) Clean and inspect the complete engine. Replace any damaged or worn out parts. 12) Replace packings and gaskets with new ones. INTERVAL :Every 8 hours(daily) :Every 8 hours(refill daily up to upper limit) :Initial 20 hours and every 50 hours afterward :Every 8 hours (daily) :Every 8 hours (daily) :Every 8 hours (daily) :Every 50 hours (monthly) :Every 50 hours (monthly) :Every 200 hours (yearly) :Every 200 hours (yearly) :Every 200 hours :Every reassembling 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
(3)
Ignition System
(i)
Spark Plugs.
(ii)
Magneto or electronic ignition system.
(iii) Spark advance/retard system.
(4)
Miscellaneous Items Used in Above Systems
(i)
Hoses, Sealing gaskets, belts, connectors, and assemblies.
Makita USA, Inc
will furnish with each new engine written instructions for the maintenance and
use of the engine by the owner.
(e)
MAINTENANCE STATEMENTS
It is your responsibility to have all scheduled inspection and maintenance services performed
at the times recommended in the 2007 and later Owner's Manual and to retain proof that
inspection and maintenance services are performed at the times when recommended.
Makita
USA, Inc
will not deny a warranty claim solely because you have no record of maintenance;
however,
Makita USA, Inc
may deny a warranty claim if your failure to perform required
maintenance resulted in the failure of warranted part. The proof, which you maintain, should be
given to each subsequent owner of the engine. You are responsible for performing the
scheduled maintenance described below based on the procedures specified in the 2007 and
later Owner's Manual. The scheduled maintenance below is based on the normal
engine-operating schedule.
PROCEDURE
INTERVAL
1)
Clean engine and check bolts and nuts.
Retighten if necessary.
:Every 8 hours(daily)
2) Check and refill engine oil (4stroke
engine only)
:Every 8 hours(refill daily up to upper limit)
3) Change engine oil (4stroke engine only)
:Initial 20 hours and every 50 hours
afterward
4) Check clogging of cooling air passage
and cylinder fins. Remove and clean if
necessary.
:Every 8 hours (daily)
5) Clean air cleaner.
:Every 8 hours (daily)
6)
Check spark plug. Clean and adjust if
necessary.
:Every 8 hours (daily)
7) Check muffler exhaust outlet(or port).
Clean if necessary.
:Every 50 hours (monthly)
8)
Check fuel filter. If clogged, replace with
new one.
:Every 50 hours (monthly)
9) Adjust valve clearance, if applicable
(4stroke engine only).
:Every 200 hours (yearly)
10) Replace fuel lines.
:Every 200 hours (yearly)
11) Clean and inspect the complete engine.
Replace any damaged or worn out parts.
:Every 200 hours
12) Replace packings and gaskets with new
ones.
:Every reassembling
27