Makita GA5093 Instruction Manual - Page 16

COMBINATION OF APPLICATIONS AND ACCESSORIES Optional accessory CAUTION: Using the tool with incorrect guards can cause risks as follows. • When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work- piece causing poor control. • When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia- mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles, as well as exposure to wheel fragments in the event of wheel burst. • When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type diamond wheels, the wheel guard may interfere with the workpiece causing poor control. • When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thickness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on the guard leading to breaking of wires. • Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry reduces a risk of exposure to dust. • When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only use a cut-off wheel guard. 2 2 8 9 3 3 4 6 10 5 7 5 Fig.30 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 12 13 14 17 18 20 11 3 2 3 15 16 3 3 21 15 19 16 5 5 5 5 Application - Grinding / Sanding - Grinding / Sanding - Sanding - Wire brushing Wire brushing Hole cutting 115 mm (4-1/2″) model 125 mm (5″) model Side grip Wheel guard (for grinding wheel) Inner flange Depressed center wheel / Flap disc Lock nut Back up pad Flex wheel Rubber pad 100 Rubber pad 115 Abrasive disc Sanding lock nut Wire wheel brush Wire cup brush Hole cutter 16 ENGLISH