Makita XAG26Z XAG26 Instruction Manual - Page 10
Assembly
View all Makita XAG26Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Automatic speed change function 1 ► 1 . Mode indicator Mode indicator status Operation mode High speed mode ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing side grip (handle) CAUTION: Always be sure that the side grip is installed securely before operation. Screw the side grip securely on the position of the tool as shown in the figure. High torque mode This tool has "high speed mode" and "high torque mode". It automatically changes operation mode depending on the work load. When mode indicator lights up during operation, the tool is in high torque mode. Accidental re-start preventive function When installing the battery cartridge while pulling the switch lever, the tool does not start. To start the tool, first release the switch lever. Then pull the lock-off lever, and pull the switch lever. Electronic torque control function The tool electronically detects situations where the wheel or accessory may be at risk to be bound. In the situation, the tool is automatically shut off to prevent further rotation of the spindle (it does not prevent kickback). To restart the tool, switch off the tool first, remove the cause of sudden drop in the rotation speed, and then turn the tool on. Soft start feature Soft start feature reduces starting reaction. Electric brake Electric brake is activated after the tool is switched off. The brake does not work when the power supply is shut down, such as the battery is removed accidentally, with the switch still on. Installing or removing wheel guard WARNING: When using a depressed center wheel, flap disc or wire wheel brush, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator. WARNING: Make sure that the wheel guard is securely locked by the lock lever with one of the holes on the wheel guard. WARNING: When using an abrasive cut-off / diamond wheel, be sure to use only the special wheel guard designed for use with cut-off wheels. 10 ENGLISH