Makita XAG26Z XAG26 Instruction Manual - Page 12

When using an abrasive cut-off / diamond wheel Optional accessory WARNING: When using an abrasive cut-off / diamond wheel, be sure to use only the special wheel guard designed for use with cut-off wheels. WARNING: NEVER use cut-off wheel for side grinding. 1 When using a wire wheel brush Optional accessory CAUTION: Do not use wire wheel brush that is damaged, or which is out of balance. Use of damaged wire wheel brush could increase potential for injury from contact with broken wires. CAUTION: ALWAYS use guard with wire wheel brushes, assuring diameter of wheel fits inside guard. Wheel can shatter during use and guard helps to reduce chances of personal injury. 2 1 2 ► 1 . Abrasive cut-off wheel / diamond wheel 2. Wheel guard for abrasive cut-off wheel / diamond wheel When using a wire cup brush Optional accessory CAUTION: Do not use wire cup brush that is damaged, or which is out of balance. Use of damaged brush could increase potential for injury from contact with broken brush wires. 1 ► 1 . Wire cup brush ► 1 . Wire wheel brush 2. Wheel guard Installing or removing X-LOCK wheel WARNING: Never actuate the release lever of the X-LOCK holder during operation. Make sure that the X-LOCK wheel has stopped completely when removing it. Otherwise, the X-LOCK wheel comes off from the tool and may cause serious injury. CAUTION: Use only original X-LOCK wheels with the X-LOCK logo. This tool is dedicated to X-LOCK. The maximum clamping gauge of 1.6 mm (1/16") can only be guaranteed with original X-LOCK wheels. Use of any other wheels may lead to insecure clamping, and cause the clamp tool to come loose. CAUTION: Do not touch the X-LOCK wheel immediately after operation. It may be extremely hot and could burn your skin. CAUTION: Make sure that the X-LOCK wheel and holder of the tool are not deformed and are free from dust or foreign matters. CAUTION: Do not put your finger near the holder while installing or removing the X-LOCK wheel. It may pinch your finger. CAUTION: Do not put your finger near the release lever while installing the X-LOCK wheel. It may pinch your finger. NOTE: No additional parts such as inner flanges or lock nuts are required to install or remove the X-LOCK wheels. 12 ENGLISH