Makita XCM01Z Instruction Manual - Page 11
Assembly
View all Makita XCM01Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Sighting for straight cutting With the dust collection cover installed, straight cut operation can safely be performed by aligning the cutting wheel toward the cutting direction before the actual cut operation. Align the guide notch in the base of dust collection cover with your intended cutting line on the workpiece. 1 3 Fig.12 2 3 ► 1 . Guide notch 2. Base 3. Cutting line Connecting a vacuum cleaner Optional accessory When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to the dust nozzle in the dust collection cover using a front cuffs 22 (optional accessory). 3 4 1 Accidental re-start preventive function When installing the battery cartridge while pulling the switch trigger, the tool will not start. To start the tool, release the switch trigger first. Press and hold the lock-off button, and then pull the switch trigger. Electronic function The tool is equipped with the electronic functions for easy operation. • Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly cease to function after the switch trigger is released, have the tool serviced at a Makita service center. • Constant speed control The speed control function provides the constant rotation speed regardless of load conditions. • Active Feedback sensing Technology The tool electronically detects situations in which the cutting wheel may be at risk to be bound. In the situation, the tool automatically stops to prevent further rotation of the spindle (it does not prevent kickback). In this case, release the switch trigger first, remove the cause of sudden drop in the rotation speed, and then pull the switch trigger to restart the tool. ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Hex wrench storage When not in use, store the hex wrench as shown in the figure to keep it from being lost. Fig.13 2 ► 1 . Front cuffs 22 2. Dust nozzle 3. Hose 4. Vacuum cleaner 1 Fig.14 ► 1 . Hex wrench 11 ENGLISH