Makita XCM01Z Instruction Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model: Wheel outer diameter Wheel inner (arbor) diameter Max. wheel thickness Max. cutting capacities With dust collect cover Without dust collect cover Rated speed (n) / No load speed (n0) Overall length Rated voltage Net weight XCM01 76 mm (3″) 9.5 mm (3/8″) 1.0 mm (1/32″) 13.5 mm (1/2″) 16.0 mm (5/8″) 20,000 /min 271 mm (10-5/8″) *1 D.C. 18 V 1.2 - 1.7 kg (2.6 - 3.7 lbs) *1. With battery cartridge (BL1860B) / Without dust collection cover • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combinations, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge and charger Battery cartridge Charger BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH / DC18WC • Some of the battery cartridges and chargers listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may cause injury and/or fire. SAFETY WARNINGS 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. General power tool safety warnings WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 2 ENGLISH