Makita XCU07PT XCU07 Instruction Manual - Page 19

TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs. Malfunction status The chain saw does not start. The saw chain does not run. The motor stops running after a little use. No oil on the chain. The chain saw does not reach maximum RPM. The main power lamp is blinking. Chain does not stop even the chain brake is activated: Stop the machine immediately! Abnormal vibration: Stop the machine immediately! Cause Two battery cartridges are not installed. Battery problem (low voltage). Main power switch is off. Chain brake activated. Battery's charge level is low. Oil tank is empty. Oil guide groove is dirty. Poor oil delivery. Battery cartridge is installed improperly. Battery power is dropping. The drive system does not work correctly. Switch trigger is pulled under an unoperatable condition. The brake band is worn down. Action Install two charged battery cartridges. Recharge the battery cartridges. If recharging is not effective, replace the battery cartridge. The chain saw is automatically turned off if it is un-operated for a certain period. Turn on the main power switch again. Release chain brake. Recharge the battery cartridges. If recharging is not effective, replace the battery cartridge. Fill the oil tank. Clean the groove. Adjust the amount of oil delivery with the adjusting screw. Install the battery cartridges as described in this manual. Recharge the battery cartridges. If recharging is not effective, replace the battery cartridge. Ask the authorized service center in your region for repair. Pull the switch trigger after the main power switch is turned on and the chain brake is released. Ask the authorized service center in your region for repair. Loose guide bar or saw chain. Tool malfunction. Adjust the guide bar and saw chain tension. Ask the authorized service center in your region for repair. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Saw chain • Guide bar • Guide bar cover • Sprocket • File • Tool bag • Makita genuine battery and charger WARNING: If you purchase a guide bar of different length from the standard guide bar, also purchase a suitable guide bar cover together. It must fit and fully cover the guide bar on the chain saw. NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. MAKITA LIMITED WARRANTY Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country. United States of America: www.makitatools.com Canada: www.makita.ca Other countries: www.makita.com 19 ENGLISH