Makita XCU07PT XCU07 Instruction Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model: XCU07 Overall length (without guide bar) 443 mm (17-1/2″) Rated voltage D.C. 36 V Net weight 4.6 - 5.5 kg (10.1 - 12.1 lbs) Standard guide bar length 350 mm (14″) Recommended guide bar length with 90PX, 91PX 300 - 400 mm (12 - 16″) with 25AP 250 mm (10″) Applicable saw chain type (refer to the table below) 90PX 91PX 25AP Standard sprocket Number of teeth 6*1 Pitch 3/8″ Chain speed Chain oil tank volume 0 - 20 m/s (0 - 1,200 m/min) (0 - 3,940 ft/min) 200 cm3 • *1 When using 25AP saw chain, use with Sprocket 9 (optional accessory). • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B • Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Saw chain, guide bar, and sprocket combination Saw chain type Number of drive links Guide bar Sprocket Guide bar length Cutting length Part No. Pitch Gauge Type Number of teeth Pitch 46 300 mm (12″) 275 mm (10-7/8″) 165245-8 90PX 52 350 mm (14″) 330 mm (13″) 165246-6 3/8″ 1.1 mm (0.043″) Sprocket nose bar 6 3/8″ 56 400 mm (16″) 370 mm (14-1/2″) 165247-4 2 ENGLISH