Makita XCU08PT XCU08 XCU09 Instruction Manual - Page 2
Specifications
View all Makita XCU08PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ENGLISH (Original instructions) SPECIFICATIONS Model: Overall length (without guide bar) XCU08 270 mm (10-5/8″) XCU09 Rated voltage D.C. 36 V Net weight Standard guide bar length 4.8 - 5.0 kg (10.5 - 11.0 lbs) 4.8 - 5.1 kg (10.6 - 11.1 lbs) 350 mm (14″) 400 mm (16″) Recommended guide with 90PX bar length 250 - 400 mm (10″ - 16") with 91PX 250 - 400 mm (10″ - 16") Applicable saw chain type (refer to the table below) Standard sprocket Number of teeth Pitch 90PX 91PX 6 3/8″ Chain speed Chain oil tank volume 0 - 20 m/s (0 - 1,200 m/min) (0 - 3,940 ft/min) 200 cm3 (6.8 fl oz) • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge BL1830 / BL1830B / BL1840B / BL1850B / BL1860B • Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. 2 ENGLISH