Makita XCU08PT XCU08 XCU09 Instruction Manual - Page 23

Malfunction status The Torque Boost mode is not available after replacing the battery cartridge with a fully charged one. The saw chain cannot be installed. Cause Depending on the usage conditions, the Torque Boost mode is not available after replacing the battery cartridge. The combination of saw chain and sprocket is not correct. Action Use the tool in the normal mode until the installed battery cartridge becomes empty, and then replace the battery cartridge with a fully charged one, or recharge the battery cartridge. Use the correct combination of saw chain and sprocket by referring to the section for specifications. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Saw chain • Guide bar • Guide bar cover • Sprocket • File • Makita genuine battery and charger WARNING: If you purchase a guide bar of different length from the standard guide bar, also purchase a suitable guide bar cover together. It must fit and fully cover the guide bar on the chain saw. NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. MAKITA LIMITED WARRANTY Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product.If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country. United States of America: www.makitatools.com Canada: www.makita.ca Other countries: www.makita.com 23 ENGLISH