Makita XLC02ZB Makita XLC02ZB Instruction Manual - Page 11

Cleaning without nozzle You can pick up powder and dust without nozzle. From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/dust pack mounting area and the dust stopper. CAUTION: • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. MAINTENANCE CAUTION: • Always be sure that the tool is switched off before attempting to perform inspection or maintenance. Cleaning Wash the filter in soapy water when it is clogged with dust and the cleaner power becomes small. Dry it out thoroughly before use. An insufficiently dried filter may cause poor suction and shorten the service life of the motor. Do not blow dust stlicking on the cleaner by air duster. It brings dust into the housing and causes failure. Things to Check Before Asking for Repairs Symptom Weak suction power Area to be investigated Is capsule full of dust? Is filter clogged? Is battery exhausted? Fixing method Empty dust from capsule. Dust down or wash filter. Recharge battery. Not working Is battery exhausted? Recharge battery. NOTE: • Do not attempt to repair cleaner by yourself. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 11 ENGLISH