Makita XLC02ZB Makita XLC02ZB Instruction Manual - Page 8
Problem Examples
View all Makita XLC02ZB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 ► 1 . Prefilter NOTE: • Always remove dust ahead of time, as suction power will be reduced if there is too much dust in cleaner. • Always be sure to check that both filter and prefilter are loaded correctly prior to using cleaner. If they are not loaded correctly, dust will get into the motor housing, and cause motor failure. If the following examples occur, filter and prefilter are not loaded correctly. Reload them correctly to rectify problem. Problem Examples Example 1: Only prefilter has been loaded (no filter) Connect capsule. Align O symbol on capsule with O symbol on handle and then firmly twist capsule in direction of arrow until it is secured. 1 ► 1 . Prefilter Example 2: Only filter has been loaded (no prefilter) 1 ► 1 . O Mark 1 2 1 ► 1 . Filter Example 3: Filter has been loaded in a peeled back state ► 1 . Handle 2. Capsule 1 ► 1 . Filter 8 ENGLISH