Makita XLC02ZB Makita XLC02ZB Instruction Manual - Page 7

1 1 2 ► 1 . Prefilter 2. Filter Disposing of dust for high performance filter In order to drop dust sticking on the filter in the capsule, tap the capsule 4 or 5 times with your hand. Now point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight. ► 1 . Securing lip Clean out the fine dust and lightly tap to dislodge dust from high performance filter. Reassembly Reassembly for normal filter Put on filter until it is fully in position on the cleaner unit. 1 2 ► 1 . Capsule 2. Suction inlet NOTE: • Dust may spill out when capsule is opened, so be sure to set a garbage bag beneath capsule. Remove accumulated dust from inside of capsule and off of high performance filter. 1 1 ► 1 . Filter NOTE: • Make sure filter is put on straight without being peeled back. If filter is put on incorrectly as shown in diagram, dust will get into motor housing, and cause motor failure. 2 1 ► 1 . Capsule 2. Hign performance filter Twist high performance filter in direction of arrow to unfasten securing lip from cleaner unit and then pull off the filter. ► 1 . Filter Connect prefilter. At this time, make sure to twist prefilter so that securing lip is firmly locked into cleaner unit. 7 ENGLISH