Makita XLC03ZBX4 XLC03 Instruction Manual - Page 10

NOTE: When installing the extension wand, be sure to align the release button with the hook 1 on the extension wand. If they are not aligned, the wand will not be locked and may come off from the cleaner. NOTE: When installing the extension wand without lock function (optional accessory), twist and insert it to the suction inlet of the cleaner in direction of the arrow. To disconnect, twist and remove it also in direction of the arrow. 2 ► 1 . HEPA filter 2. High performance filter OPERATION CAUTION: Do not move your face close to the air vent when operating the cleaner. If foreign objects are blown into eyes, it may result in personal injury. Installing or removing the cleaner attachment CAUTION: After installing attachment, check if it is securely installed. If the attachment is installed imperfectly, it may come off and cause personal injury. CAUTION: Be careful not to hit your hand on the wall etc. when removing the attachment. When using the extension wand with lock function To install the extension wand, insert it to the suction inlet of the cleaner until it clicks. Make sure that the extension wand is locked. 3 1 To remove, pull the extension wand while pushing the release button. 1 2 ► 1 . Release button 2. Extension wand When using the nozzle CAUTION: To connect the nozzle, twist and insert it in direction of the arrow to secure the connection during use. To disconnect the attachment, twist and extract it also in direction of the arrow. If the nozzle is twisted in the opposite direction, the capsule may become loose. To install the nozzle, twist and insert it securely to the suction inlet of the cleaner or the end of extension wand. To disconnect, twist and remove it. 2 ► 1 . Suction inlet 2. Extension wand 3. Hook 10 ENGLISH