Makita XLC03ZBX4 XLC03 Instruction Manual - Page 13

Wall mount for cordless cleaner

Page 13 highlights

HEPA filter Optional accessory NOTICE: Do not rub or scratch the HEPA filter with hard objects such as a brush and a paddle. Clogged HEPA filter cause poor suction performance. Clean out the filter from time to time. Occasionally wash the HEPA filter in water, rinse and dry thoroughly in the shade before use. Never wash the 1 filter in a washing machine. 2 Sponge filter When the sponge filter becomes dirty, clean it as follows. 1. Remove the filter. 2. Pull out the sponge filter from between the pillars. 3. Clean the sponge filter by tapping or washing. If you wash it, dry it out thoroughly before use. 4. Insert the sponge filter between the pillars and set it in the original position. Make sure that each bottom edge of the pillar holds down the sponge filter, and there is no gap between the sponge filter and suction opening. ► 1 . Sponge filter 2. Bottom edge of pillar Wall mount for cordless cleaner Optional accessory NOTE: The screw to mount the holder is not included. Prepare a screw which fits with the material to screw into. Attach the wall mount for cordless cleaner to a hard wooden wall, beam or column, where the wall mount for cordless cleaner can be firmly secured. Always be sure that the wall mount for cordless cleaner is securely attached before hanging the cleaner. 1 ► 1 . Wall mount for cordless cleaner CAUTION: Do not hang the cleaner to the wall mount violently or hang other appliances than the cleaner. 13 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

13
ENGLISH
HEPA filter
Optional accessory
NOTICE:
Do not rub or scratch the HEPA filter
with hard objects such as a brush and a paddle.
Clogged HEPA filter cause poor suction performance.
Clean out the filter from time to time.
Occasionally wash the HEPA filter in water, rinse and
dry thoroughly in the shade before use. Never wash the
filter in a washing machine.
Sponge filter
When the sponge filter becomes dirty, clean it as
follows.
1.
Remove the filter.
2.
Pull out the sponge filter from between the pillars.
3.
Clean the sponge filter by tapping or washing. If
you wash it, dry it out thoroughly before use.
4.
Insert the sponge filter between the pillars and set
it in the original position. Make sure that each bottom
edge of the pillar holds down the sponge filter, and
there is no gap between the sponge filter and suction
opening.
1
2
1.
Sponge filter
2.
Bottom edge of pillar
Wall mount for cordless cleaner
Optional accessory
NOTE:
The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
1
1.
Wall mount for cordless cleaner
CAUTION:
Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.