Makita XLC03ZBX4 XLC03 Instruction Manual - Page 8
Reassembly
View all Makita XLC03ZBX4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 1 2 ► 1 . Capsule 2. Suction inlet Point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight. 1 ► 1 . Securing lip NOTE: When using the prefilter, also follow the procedure above. Clean out the fine dust and lightly tap to dislodge dust from high performance filter. Reassembly Connect high performance filter. At this time, make sure to twist high performance filter so that securing lip is firmly locked into the cleaner unit. 2 ► 1 . Capsule 2. Suction inlet NOTE: Dust may spill out when capsule is opened, so be sure to set a garbage bag beneath capsule. Remove accumulated dust from the inside of capsule and high performance filter. 1 1 ► 1 . High performance filter 2 ► 1 . Capsule 2. High performance filter Twist high performance filter in direction of arrow to unfasten securing lip from cleaner unit and then pull off the filter. 1 ► 1 . Securing lip 8 ENGLISH