Makita XRU02Z Instruction Manual - Page 3
Electrical and battery safety, Starting up the tool - parts
![]() |
View all Makita XRU02Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
010820 3. Always wear a helmet where there is a risk of falling objects. The protective helmet is to be checked at regular intervals for damage and is to be replaced at least every five years. Use only approved protective helmets. 4. The visor of the helmet (or alternatively goggles) protects the face from flying debris and stones. During operation of the tool always wear goggles, or a visor to prevent eye injuries. 5. Wear adequate noise protection equipment to avoid hearing impairment (ear muffs , ear plugs etc.). 4. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 5. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 7. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. Starting up the tool 360° 010821 6. Work overalls protect against flying stones and debris. It is strongly recommended that the user wears work overalls. 7. Special gloves made of thick leather are part of the prescribed equipment and must always be worn during operation of the tool. 8. When using the tool, always wear sturdy shoes with a nonslip sole. This protects against injuries and ensures a good footing. Electrical and battery safety 1. Avoid dangerous environment. Don't use the tool in damp or wet locations or expose it to rain. Water entering the tool will increase the risk of electric shock. 2. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 3. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 012858 1. Make sure that there are no children or other people within a working range of 15 meters (50 ft), also pay attention to any animals in the working vicinity. Otherwise stop using the tool. 2. Before use always check that the tool is safe for operation. Check the security of the nylon cutting head and the guard and the switch trigger/lever for easy and proper action. Check for clean and dry handles and test the on/off function of the switch. 3. Check damaged parts before further use of the tool. A guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by our authorized service center unless indicated elsewhere in this manual. 4. Switch on the motor only when hands and feet are away from the nylon cutting head. 5. Before starting make sure that the nylon cutting head has no contact with hard objects such as branches, stones etc. as the nylon cutting head will revolve when starting. 3
![](/manual_guide/products/makita-xru02z-instruction-manual-e228ca5/3.png)