Marantz AV7701 AV7701 - User Guide - Page 132
F. Height R, Surr. Back R
View all Marantz AV7701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Basic version Advanced version Setting items Setting details Levels Test Tone Start : Output test tone. Set the volume of the test • Front L / F. Height L / Center / F. Height R / Front R / F. Wide R / tone to be the same when it Surround R / Surr. Back Rz / Surr. Back Lz / Surround L / is output from each speaker. F. Wide L / Subwoofer : Select speaker to output test tone. zz When the "Speaker Config." - "Surr. Back" setting (vpage 128) is set to "1spkr", "Surr. Back" is displayed. • -12.0dB - +12.0dB (0.0dB) : Adjust the volume. When "Levels" is adjusted, the adjusted values are set for all the sound modes. NOTE • Speakers set to "None" in the "Speaker Config." (vpage 127) settings are not displayed. • When a headphones jack is inserted in the PHONES jack of this unit, the "Levels" is not displayed. Set Defaults : The "Levels" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Set Defaults" and press ENTER, the "Reset to the default values?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Speakers Setting items Setting details Crossovers Crossover : Set the crossover frequency. Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / of the bass signal output 250Hz / Individual : Set the crossover frequency for all speakers. See from each channel to the speaker manual for information concerning speaker crossover the subwoofer. Set the frequency. Crossover Frequency to suit the bass reproduction capability of the speaker being used. The following settings can be set when the "Crossover" setting is set to "Individual". • Front / Center / Surround / Surr. Back / Front Height : Select speaker for setting of crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequency. • "Crossovers" can be set when the "Bass" - "Subwoofer Mode" (vpage 128) setting is "LFE+Main", or when you have a speaker that is set to "Small". • Always set the crossover frequency to "80Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • The speakers that can be set when "Individual" is selected differ depending on to the "Subwoofer Mode" setting (vpage 128). • When "LFE" is selected, speakers set to "Small" at "Speaker Config." can be set. If the speakers are set to "Large", "Full Band" is displayed and the setting cannot be made. • If set to "LFE+Main", this setting can be made regardless of the speaker size. Information DVD 129