Marantz DR6000 DR6000 USER'S MANUAL - Page 10

ENGLISH RECORDING The numbers between parentheses refer to the fold-out. Remarks about recording You will soon discover how easy it is to make your own CDs. Nevertheless, it is advisable to use a CD-RW disc for your first try. • If the disc is a CD-RW and is already finalized you must unfinalize it first. • The recording procedure is the same for CD-Rs and CDRWs. • If the disc already contains recordings, the CD-Recorder will automatically search for the end of the last track, so that recording can start from there. • There must be at least 7 seconds of recording time left on the disc, otherwise you will not be able to enter record standby mode. then lights up. • If the display indicates , no digital re- cording can be made of the source material. Recording will not start. • The Serial Copy Management System (SCMS) only allows digital recording under specific conditions: - This means that it is not possible to make a digital copy from a digital copy. - Analog recording is always possible ! - The number of recordings from the original is unlimited. Digital Digital CD CDR, DAT CDR, DAT Analog Digital CDR, DAT CDR, DAT Digital CDR, DAT Analog CDR, DAT Digital Digital CDR, DAT CDR, DAT O : Can be recorded. X : Cannot be recorded. • A maximum of 99 tracks can be recorded on a disc. Minimum allowable track length is 4 seconds. • Recordings from DAT or DCC players will not always stop automatically. Important: If you want to play the recorded CD-R disc on any regular CD player, it must first be finalized. (See FINALIZING/ UNFINALIZING.) Finalized CD-RW discs play only on CD-RW compatible CD players. Recording modes Your recorder offers several recording modes. - - to make a synchronised recording of the complete disc or a program simply by starting the source. - - to make a synchronised recording of a single track simply by starting the source. - - to manualy start a recording simply by pressing the REC key. - - to make a synchronised recording of the com- plete disc or a program simply by starting the source. Finaliz- ing will be done automatically. Some remarks on recording: - When Auto track is on (default setting), track numbers will automatically be increased during recording. - By programming tracks first, a compilation can be recorded. - If a finalized CD recordable disc is inserted in the CD-Re- corder, not possible. will be displayed. Recording is - If a finalized CD rewritable disc is inserted in the CD-Re- corder, and will be dis- played when the REC TYPE (20) is pressed. If PUSH EN- TER (12, 65) is pressed, the disc will be unfinalized. - When you copy a special disc such as HDCD or DTS, you have to • set the sampling frequency at 44.1kHz. • use the digital connection. • set the digital rec-volume of the CD-Recorder at 0 dB. - When you copy the tracks from a DAT recorded by different sampling frequencies, noise might be recorded in the disc. Please set a sampling frequency for every track in a DAT. - This CD-Recorder can record about 17 seconds of a pause time, which decreases the time count just before music start in a track on the display. If you record a track including more than 17-seconds-pause time by digital recording, the pause time will be recorded the different length of time from original. However, the entire track time will not be changed and be able to listen to the music as same as original. Warning: No more recording possible after finalizing CD-R disc! DR6000(U)_Eng_P01-10.p65 8 8 8/7/00, 1:35 PM