Marantz DR6000 DR6000 USER'S MANUAL - Page 12
Manual start recording - cd recorders
View all Marantz DR6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH RECORDING The numbers between parentheses refer to the fold-out. POWER ON/OFF CD RECORDER DR6000 Recordable ReWritable OPEN/CLOSE DISPLAY SCROLL SOURCE REC TYPE REW FF STOP PLAY/PAUSE ERASE STORE MENU CANCEL DELETE FINALIZE EASY JOG PUSH ENTER REC LEVEL - + PHONES u ABC 1 JKL 4 RST 7 DISPLAY CDR DEF 2 MN 5 UVW 8 SPACE 0 FUNCTION GHI 3 OPQ 6 XYZ 9 SCROLL CD e r ty u MENU/ STORE ENTER CANCEL/ DELETE Manual start recording Manual recording from external CD player. 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Connect the cable from an external CD player to the CD- Recorder. (see INSTALLATION page 5 and 6.) 3 Press SOURCE (7) repeatedly until the selected exter- nal source appears on the display (depending on the connection used): , or lights up and , or appears on the display. About Auto Track increment • When Auto Track is ON (default setting), track numbers will automatically be increased during recording. • To switch off the Auto Track function you have to enter MENU MODE. If you wish to increase track numbers manually, press TRACK INCR(ement) on the remote control. For further instructions see MENU MODE. ON (AUTO): The track increments are automatically taken over from the digital source material or after 2.7 seconds silence during analog recording. OFF (MANUAL): Track numbers can be incremented manually by pressing TRACK INCR (ement) (54) on the remote control. (Minimum track length is 4 sec.) • Track numbers cannot be changed after recording. Note: Auto track works only with Consumer Sources with a digital output signal according to the IEC 958 (consumer part) audio standard. 4 With the recorder stopped, press REC TYPE (20) three times to enter the Manual Record standby mode. MANUAL starts to flash and the display shows . • If message also flashes, the digital con- nection is incorrect. 5 Set the optimal recording level on the CD-Recorder. q Play the source first to set the optimal recording level on the CD-Recorder. w Rotate the EASY JOG (12) key until, on the Record/Play Level bar, all the white segments are alight, but the red segments do not light continuously during the loudest passages. DIGITAL RECORDING : +6dB ~ -63dB ANALOG RECORDING : 0dB ~ -63dB e Stop the source. 6 To start recording, press 0 REC (13) on the CD-Re- corder and immediately start the source (from Stopmode). The track number and recording time left appear on the display. • To record a 3-second silence at the start of a track, press 2/; PLAY/PAUSE (16) on the CD-Recorder before starting the source. • To check the elapsed recording time, press DISPLAY (58) on the CD-Recorder. (This can also be done during the recording.) 7 To stop recording, press 9 STOP (17, 68). • If 9 STOP (17, 68) was pressed within 3 seconds af- ter 0 REC (13), no recording will take place. • To interrupt recording, press 2/; PLAY/PAUSE (16) or ; PAUSE (63). After recording the display will show for sev- eral seconds. Important: If you want to play the recorded CD-R disc on any regular CD player, it must first be finalized. See finalizing discs. Finalized CD-RW discs play only on CD-RW compatible CD players. DR6000(U)_Eng_P01-10.p65 10 10 8/7/00, 1:35 PM