Marantz DR6000 DR6000 USER'S MANUAL - Page 9

ENGLISH USING THE RECORDER The numbers between parentheses refer to the fold-out. Switching ON and OFF 1 Connect the power cord into the mains. Inserting discs AC IN q 2 Press the POWER ON/OFF (1) button on the front of the CD-Recorder to turn it on or off. STANDBY POWER ON/OFF CD RECORDER DR6000 Recordable ReWritable OPEN/CLOSE DISPLAY SCROLL 1 Press / OPEN/CLOSE (6) to open the disc tray. lights up. 2 Insert a CD, CD-R or CD-RW in the appropriate recess in the tray, label side up. 3 Press / OPEN/CLOSE (6) to close the tray. lights up, followed by and the dis- play will show the type of disc you inserted. w Using the remote control 1 Open the battery compartment cover. 2 Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as shown. 3 Replace the cover. • If a CD-R(W) is finalized it will show CD on the display. • If CD-text is available the TITLE/ARTIST will scroll by. Note: - We recommend you use 2 batteries of the same type and condition. - Always point the remote control directly towards the recorder and make sure there. This remote control can switch "STANDBY ON/OFF" but cannot switch "POWER ON/OFF" the CD-Recorder. Batteries contain chemical substances, so they should be disposed of properly. Note: - Only Audio CDs will be accepted. If a non-audio disc is inserted, the display shows . - For recording it is important that the blank disc is completely free from dust particles or scratches. (see Compact Discs page 1). - If you insert a blank or partly-recorded CD-R or unfinalized CD-RW, the CD-Recorder will calibrate the disc for optimum recording. During this process the display will first show and then the number of audio tracks. Calibration can take up to 25 seconds. DR6000(U)_Eng_P01-10.p65 7 7 8/7/00, 1:35 PM