Marantz DR6000 DR6000 USER'S MANUAL - Page 22

ENGLISH OTHER INFORMATIONS The numbers between parentheses refer to the fold-out. Player does not react • use the POWER ON/OFF (1) button on the front of the Player to switch it off and back on on display • a power failure has occurred during recording the CD- Recorder is attempting to repair the disc • If then appears on the display, the disc cannot be recorded further, and cannot be finalized. But it can still be played on the CD-Recorder or another CD- Recorder. • on a CD-R(W) disc, the track being recorded is lost, but further recording and finalisation can still be done POWER ON/OFF CD RECORDER DR6000 Recordable ReWritable OPEN/CLOSE DISPLAY SCROLL SOURCE REC TYPE REW FF STOP ERASE STORE MENU CANCEL DELETE FINALIZE EASY JOG PUSH ENTER REC qwe ww Diagnostic Program If the malfunction continues, perform the Diagnostic Program: 1 Switch the recorder off using the POWER ON/OFF (1). 2 Simultaneously press the R (18) and Q (19) and switch the recorder back on using the POWER ON/OFF (1). The display will now indicate ' '. After a few minutes, the message will change to ' ' or ' '. If the message appears, your recorder is defec- tive and needs to be repaired. Consult your supplier or call the Marantz Consumer Line to find the nearest serv- ice centre. The number of the Consumer Line can be found in the guarantee booklet. If the ' ' message appears, there is no clear defect and the malfunction may be a result of misinter- pretation of the user instructions, an inappropriate disc, a mechanical defect or an incorrect connection. To solve this problem, carefully read the user instructions once again; you can also contact your supplier. If you cannot solve the problem, go to the nearest serv- ice centre. 3 Switch off the recorder using the POWER ON/OFF (1) to exit from the Diagnostic Program. DR6000(U)_Eng_P11-21.p65 20 20 8/7/00, 1:37 PM