Marantz DV7600 DV7600 User Manual - Page 38

Audio

Page 38 highlights

6 DVD Setup Menu Setup Examples Resolution (HDMI Setting) Playback Disc Disc Recorded in Squeeze Ratio Disc Recorded in 4:3 Ratio Aspect (HDMI Setting) Monitor Settings Aspect (HDMI Setting) Monitor Settings 480p/576p (525p/625p) 720p/1080i (750p/1125i) 16:9 Wide 16:9 Squeeze Full/Squeeze Normal/Through 4:3 16:9 Wide 16:9 Squeeze Standard Normal 4:3 Through Some monitors may use setting names that are different than those shown here. Audio • Auto: Audio is output as a bit stream when the connected device is set to Dolby Digital, DTS, or MPEG. Audio is output as linear PCM when the connected device is set to Linear PCM. If the connected device cannot accept bit streams, audio will be output as linear PCM. • PCM: Audio is converted to linear PCM. • OFF: HDMI output Audio = OFF Select the Digital Out (page 12) setting as described in "Setup Menu - Audio" (page 39). Select one of the above with the ENTER button. HDMI Audio Output Note • Audio is not output from Super Audio CDs or DVD-Audio discs with CPPM protection. • Audio is not output when the player is connected to a device with an HDCP-compatible DVI jack. • All of PCM signal from digital out (page 12) is converted to 44.1kHz/48kHz. • Turn the power on the front panel OFF during play or pause. Noise from a television etc. may come out. • When HDMI Audio is set to Auto or PCM, the Digital Out (page 12) setting is as per HDMI Audio. DVD Audio Formats HDMI Setting (Audio) Auto PCM OFF Dolby Digital Dolby Digital*1 2 Channel DOWNMIX OFF Linear PCM Left/Right Left/Right OFF DTS DTS*1 2 Channel DOWNMIX OFF MPEG MPEG*1 Left/Right OFF With CPPM protection *2 DVD-Audio Without CPPM protection *2 *2 OFF *2 OFF CD/MP3/Super Audio CD*3 Left/Right OFF DTS CD DTS*1 2 Channel DOWNMIX OFF Video CD Left/Right OFF *1: The player automatically switches to PCM output when the connected device does not support Dolby Digital, DTS, or MPEG bit streams. *2: Output will be 48kHz/16-bit or 44.1kHz/16-bit. Multi-channel PCM sources are down mixed to channel 2. (A source whose down-mixing is prohibited is only output to FL/FR.) *3: Audio is not output from Super Audio CDs. This applies to only play the CD Audio part. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

DVD Setup Menu
6
38
Some monitors may use setting names that are different than those shown here.
Setup Examples
Resolution
(HDMI Setting)
480p/576p
(525p/625p)
720p/1080i
(750p/1125i)
Playback Disc
Disc Recorded in Squeeze Ratio
Disc Recorded in 4:3 Ratio
Aspect (HDMI Setting)
Monitor Settings
Aspect (HDMI Setting)
Monitor Settings
Full/Squeeze
4:3
Standard
16:9 Wide
16:9 Wide
Normal
16:9 Squeeze
Normal/Through
16:9 Squeeze
4:3
Through
Audio
Auto:
Audio is output as a bit stream when the
connected device is set to Dolby Digital, DTS, or
MPEG. Audio is output as linear PCM when the
connected device is set to Linear PCM. If the
connected device cannot accept bit streams,
audio will be output as linear PCM.
PCM:
Audio is converted to linear PCM.
OFF:
HDMI output Audio = OFF
Select the Digital Out (
page 12
) setting as
described in “Setup Menu - Audio” (
page 39
).
Select one of the above with the
ENTER
button.
Note
Audio is not output from Super Audio CDs or
DVD-Audio discs with CPPM protection.
Audio is not output when the player is con-
nected to a device with an HDCP-compatible
DVI jack.
All of PCM signal from digital out
(
page 12
) is
converted to 44.1kHz/48kHz.
Turn the power on the front panel
OFF
during
play or pause. Noise from a television etc. may
come out.
When HDMI Audio is set to Auto or PCM, the
Digital Out (
page 12
) setting is as per HDMI
Audio.
*1
:The player automatically switches to PCM output when the connected device does not support Dolby
Digital, DTS, or MPEG bit streams.
*2
:Output will be 48kHz/16-bit or 44.1kHz/16-bit.
Multi-channel PCM sources are down mixed to channel 2. (A source whose down-mixing is prohibited
is only output to FL/FR.)
*3
: Audio is not output from Super Audio CDs. This applies to only play the CD Audio part.
HDMI Audio Output
Audio Formats
Dolby Digital
Linear PCM
DTS
MPEG
DVD-Audio
With CPPM protection
Without CPPM protection
CD/MP3/Super Audio CD*
3
DTS CD
Video CD
Auto
Dolby Digital*
1
Left/Right
DTS*
1
MPEG*
1
*2
*2
DTS*
1
PCM
2 Channel DOWNMIX
Left/Right
2 Channel DOWNMIX
Left/Right
*2
*2
2 Channel DOWNMIX
HDMI Setting (Audio)
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Left/Right
Left/Right
DVD