Marantz NR1402 NR1402N_ENG_CD-ROM_v00 - Page 59

Basic version Advanced version Setting items Speaker Config. (Continued) Bass Setting Set subwoofer and LFE signal range playback. Setting details F.Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When "Pre Assign" setting (vpage 55) is "F.HEIGHT", you can make the "F.Height" setting. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to "Small" speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer. • "Subwoofer Mode" can be set when "Speaker Config." - "Subwoofer" (vpage 55) is set to "Yes". • Play music or a movie source and select the mode offering the strongest bass. • Select "LFE+Main" if you want the bass signals to always be produced from the subwoofer. NOTE If "Front" and "Center" for "Speaker Config." are set to "Large", and "Subwoofer Mode" is set to "LFE", no sound may be output from the subwoofers, depending on the input signal or selected surround mode. LPF for LFE : Set LFE signal playback range. Set this when you want to change the playback frequency of the subwoofer. • 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz System Setup Setting items Distance Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details Unit : Set the unit of distance. • Meters / Feet Step : Set the minimum variable width of the distance. • 0.1m / 0.01m • 1ft / 0.1ft Default : The "Distance" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Front L / Front R / Center / Subwoofer / Surround L / Surround R / S.Back Lz / S.Back Rz / F.Height L / F.Height R : Select the speaker. zz When the "Speaker Config." - "S.Back" setting (vpage 55) is set to "1spkr", "S.Back" is displayed. • 0.00m - 18.00m / 0.0ft - 60.0ft : Set the distance. • The speakers that can be selected differ depending on the "Pre Assign" (vpage 55) and "Speaker Config." (vpage 55) settings. • Default settings : Front L / Front R / Center / Subwoofer / F.Height L / F.Height R : 3.60 m (12.0 ft) Surround L / Surround R / S.Back L / S.Back R : 3.00 m (10.0 ft) • Set the difference in the distance between the speakers to less than 6.00 m (20.0 ft). NOTE Speakers set to "None" in "Speaker Config." (vpage 55) are not displayed. vSee overleaf Information BD 56