Marantz RC5400 RC5400 User Manual - Page 11
Navigating the RC5400 - remote
View all Marantz RC5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started Modes The RC5400 has different "Modes". When you activate the RC5400 for the first time, it starts up in USE mode allowing you to immediately operate your devices. In USE mode, the center of LOWER TOOL BAR displays the MODE icon .Tap and hold the MODE icon more than 3 seconds. The Mode Menu page will appeares. If the center of LOWER TOOL BAR shows another icon, like , tap it to reveal the Mode Menu and press the Left Function button labeled Exit to return to USE mode. Note If you do not see the Mode icon; it has been deactivated via the Setup. To enable this function, the Mode Menu setting in the Setup has to be set to Active (see page 13). 2. User Guide Navigating the RC5400 Your RC5400 is capable of displaying hundreds of different control pages. RC5400 presents you various ways to navigate to the specific device and page easily. Navigating the Devices Home - The Home Page displays convenient jump buttons to the main control page of your system devices (your Amp., TV, DVD player etc.). These buttons also select the Input of your Home Theater Receiver or Preamp. instant Access Home page by pressing the HOME button at the bottom left of the remote. • Device buttons in the Home page perform two actions when pressed; 1. Jumps to the main page of the Device. 2. Changes your home theater receiver/preamp to the appropriate input. To program for a non-Marantz receiver/preamp, see page 28. 7