Marantz RC5400 RC5400 User Manual - Page 40

Reference 4 You can add the device with or without RC codes. n Create with RC codes: Choose this option if you have the exact Marantz component listed. The new device is added with operational buttons. n Create without RC codes: If you choose this option, the new device is added with greyed-out buttons. Program them using LEARN and LABEL mode. Note When you add a device without RC codes, all buttons are visible as grayed-out. By experimentally adding devices and inspecting them in USE mode, you can decide which is the best match to your component and delete the ones not used. Tap the button of your choice. The new device will be automatically displayed once you return to USE mode. 5 Add all other devices you want and return to the Mode Menu page by tapping label in the LOWER TOOL BAR. 6 Return to USE mode by pressing the Left Function button labeled Exit . Copy Existing Device Tap the Copy existing device button in the ADD mode page to copy a device that is already active. TIP It is often useful to have two almost identical devices for your Television. The only difference between the two is one would have the Vol+ and Vol- Direct Access buttons programmed locally with the televisions internal volume + and - commands. Label this device TV Only (for use late at night without Surround Sound). The other TV device has no programming in its Direct Access buttons; as a result, the surround receiver's Vol+ and Vol- (programmed globally on the Home panel) is issued when the TV device is selected. User Guide 36