Marantz SA-11S1 SA-11S1 User Manual - Page 18

OPERATION To start playback form the first track Press PLAY button. To stop playback Press STOP button. To eject disc Press OPEN/CLOSE button to open the disc tray and take the disc off. Press the button again to close the tray. Disc tray must be closed when the unit is not be used. To pause playback Press PAUSE button. PAUSE indicator will light and playback is paused at the point that the button is pressed. To restart playback, press PAUSE button again or press PLAY button. To change time display Press the TIME button on the remote control. Each time TIME button is pressed, display will change in the following order. "Track elapsed time" → "Track remaining time" → "Total remaining time" → "Track elapsed time". • Track remaining time (The remaining playing time from the playing point to the end of the current track) "REMAIN" "-" is displayed is displayed • Total remaining time (The remaining playing time from the playing point to the end of the last track) "TOTAL REMAIN" "-" is displayed is displayed * If TIME button is pressed when Super Audio CD disc that supports text is in use, time display is given priority and the text information will not be displayed afterward. To see the text information, press TEXT button. 7 Switching Sound Mode (Super Audio CD) OPEN/ CLOSE SUPER AUDIO CD PLAYER SA-11S1 DISPLAY OFF SOUND MODE POWER ON/OFF PLAY STOP PAUSE SOUND MODE Button q Press SOUND MODE button in stop mode (not playing). The currently selected layer or area is shown on the LCD. (CD or Super Audio CD) If SOUND MODE button is pressed again, a playable layer or area will be shown, and the layer or area will be switched to new one. * When layer or area is switched, TOC will be read again. * The sound mode cannot be changed for Audio CDs and discs with only a Super Audio CD area. * The sound mode on hybrid layer discs will be changed in the following order. Super Audio CD stereo area → CD layer → Super Audio CD stereo area * Sound mode can be selected while the tray is open. Select a desired layer or area and press PLAY button then the tray will close and playback will be started. w Press the SOUND MODE button during playback. The currently selected layer or area is shown on the LCD. (CD or Super Audio CD) If SOUND MODE button is pressed again, the playback is stopped, and the layer or area will be switched to new one. When you want to listen at that area, press PLAY button again. The playback will be started. START SOUND MODE When a Super Audio CD hybrid layer discs that has both a Super Audio CD high sound quality stereo area and an Audio CD area information are to be played, this player makes it possible to set the layer/area (Super Audio CD or Audio CD) to be preferentially played. This setting can be made when the tray is closed and there is no disc in the disc tray. q Press SOUND MODE button on the player. The currently selected layer/area is displayed. If the Super Audio CD is selected : Super Audio CD If the Audio CD is selected : CD w Press the SOUND MODE button again to display the layer/ area to be played first, and then leave the setting for at least two seconds to register the setting for the start sound mode. Caution * Start sound mode has a memory retention function where the settings remain stored and unchanged even when the disc is changed or the power is turned off. * At the time of shipment, the sound mode is set to Super Audio CD. 13 ENGLISH