Marantz SA-11S1 SA-11S1 User Manual - Page 19
MAKING YOUR FAVORITE, AUDIO SETTINGS, Playing the CD layer of an audio, CD or Super Audio CD
View all Marantz SA-11S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH OPERATION MAKING YOUR FAVORITE AUDIO SETTINGS The settings can be made using the remote control (RC11SAS1). The settings are retained even if the power is turned off so that you can always enjoy tracks with your favorite characteristics. To change the settings again, make the changes using the same procedure. The settings can be changed when the track is stopped. 7 Playing the CD layer of an audio CD or Super Audio CD q Noise shaper operation In this unit, you can select noise shaper on or off for playing tracks. The noise shaper is turned on and off by pressing the NOISE SHAPER button while the track is stopped. When turned on, the NSHP indicator lights up on the LCD. * Noise shaping is a type of digital feedback used in the algorithms for oversampling. This digital feedback enables improved linearity for low levels (-70 to -90 dB) and better noise characteristics in the audible band. However, this digital feedback is still feedback nonetheless. Generally, in amplifiers and other equipment, the sound quality changes based on the amount of feedback. Low feedback is said to result in poor audio characteristics but good sound. Although no measurement differences are shown in the SA-11S1, the sound quality is changed. Therefore, make the setting according to your preferences. w DC filter operation The DC filter is turned on and off by pressing the DC FILTER button while the track is stopped. When turned on, the DCF indicator lights up on the LCD. * The DC filter is effective when the speakers vibrate abnormally for discs with recorded audio having extremely low noise characteristics. (The cutoff frequency is set to 1.7Hz.) e Digital output off operation The digital output function is turned on and off by pressing the DIGITAL OUT button while the track is stopped. When digital output is turned off, the D OFF indicator lights up on the LCD. * When digital output is not used, setting to digital output off enables you to enjoy better sound quality. Note * The noise shaper, DC filter, and digital output off have a memory retention function where the settings remain stored and unchanged even when the disc is changed or the power is turned off. 14