Marantz SA-11S1 SA-11S1 User Manual - Page 25

ENGLISH OPERATION CHANGING THE TEXT BRIGHTNESS ON THE LCD (LCD CONTRAST ADJUSTMENT) Changing procedure (Changes can be made from the main unit when operation is stopped.) q If playback is in progress, press the STOP button to stop playback. w Hold down the PAUSE button on the main unit for at least two seconds. (This operation does not work on the remote control.) After holding down the button for two seconds, the current contrast value is displayed. Within two seconds while it is displayed, press the button to increase the contrast, or press the button to reduce the contrast. Changes can be made to the contrast level over the entire range (+8 to -8). If the or button is not pressed within two seconds, the contrast is automatically set to the currently displayed level. Display example: Contrast +-0 e Pressing the STOP button while changing the setting returns to the default setting (+-0). * Any changes made to the LCD contrast setting are retained even when the power is turned off. * The range of the LCD contrast setting is preset to be small. 2. Setting for turning on only LCD (illumination lamp (blue) remains off) In the default state, the illumination lamp (blue) is lit. In this state, the illumination lamp (blue) remains off regardless of whether the LCD is turned on or off. Changing procedure (Changes can be made when operation is stopped.) q If playback is in progress, press the STOP button to stop playback. To make the setting, hold down the DISPLAY button for at least two seconds from the remote control (RC-11SAS1). w If the illumination lamp (blue) is lit, it is turned off and is set off. To change the setting from off to on, hold down the same operation DISPLAY button for at least two seconds to turn on. * The illumination lamp (blue) off setting is retained even when the power is turned off, and this setting remains until the setting is changed to the on setting. * The LCD display on/off setting is not retained when the power is turned off. (This enables you to enjoy operation each time you use it.) TURNING OFF THE DISPLAY AND ILLUMINATION (DISPLAY OPERATION) This function is used to turn the LCD and illumination lamps (blue) on and off. (Two display statuses are available.) 1. Mode where LCD and illumination lamp (blue) turn on Each time the DISPLAY button is pressed during playback, the LCD and illumination lamp (blue) switch on and off. When Display Off is set, the Display Off indicator (red) lights up. * When any related button is pressed (such as when the OPEN/CLOSE button, STOP button, or button is used), the display is automatically turned on, but the Display Off indicator (red) remains lit. If a track is started in this state, the display is automatically turned off two seconds later. * When a track is stopped, the Display Off indicator (red) and illumination lamp (blue) light up alternately. 20