Marantz SA-11S1 SA-11S1 User Manual - Page 26

ENGLISH OPERATION TIMER PLAY This unit can perform timer play by cooperating with your audio timer. Connect this unit's power cord to the audio timer's power socket and the timer's power cord to power outlet. * For connection to audio timer and it's operation, please refer to the instruction manual of your audio timer. Audio Timer ABOUT BALANCED JACKS q The balanced output connector uses a XLR connector. w The XLR connector for professional use is internally wired in either of the following two systems. 1. USA system (Pin w = COLD, Pin e = HOT) w COLD q e GND HOT 2. European system (Pin w = HOT, Pin e = COLD) Setting method of Timer Play q Press POWER switch to turn ON the power. w Insert the disc to be played. * In timer play mode, tracks are played normally. e Set the audio timer. wq HOT e GND COLD e The SA-11S1 uses the 1. USA system. When a preamp or main amplifier adopting the European system is connected using a cable with XLR balanced connectors, the reproduced signal may be inverted of phase. In this case, correct the wiring of the one of the XLR connectors on the extremities of the cable to the USA system by exchanging the connections of pins w and e. This will make it possible to play the signal with the correct phase. 21