Marantz SA8260 SA8260 User Guide - Page 21

ENGLISH Timer Play This unit can perform timer play by cooperating with your audio timer. Connect this unit's power cord to the audio timer's power socket and the timer's power cord to power outlet. * For connection to audio timer and it's operation, please refer to the instruction manual of your audio timer. SA8260 AC IN Audio Timer Setting Timer of Play On/Off G SUPER AUDIO CD PLAYER SA8260 STANDBY POWER ON/STANDBY STEREO SACD MULTI CD DISPLAY OFF SOUND MODE TIME TEXT DISPLAY PLAY STOP PAUSE OPEN/CLOSE / / PHONES LEVEL - + q Press STOP button for 2 seconds in stop mode. Timer play is activated and "Timer On" will be displayed. Filter Switch FILTER STAN- CUSDARD TOM Super Audio CDs have a wide playback frequency band of 100 kHz that is beyond the audible range: this means that their signals contain ultra-high-range components that conventional CDs do not have. A conventional amplifier is often not built to reproduce signals containing these components, and when Super Audio CD signals are output in their original state, noise may be generated, the amplifier's protection circuits may be activated and/or the speakers may be damaged. To prevent this sort of trouble from occurring, the unit incorporates a filter (STANDARD) for attenuating the ultra-highrange components, and the filter can be set STANDARD or CUSTOM using a switch on the rear panel. (This switch is set to STANDARD when the unit is shipped from the manufacturing plant.) When the unit is to be connected with a next-generation amplifier that supports Super Audio CDs and set the switch to CUSTOM for use. This will ensure play with a wider frequency range. * Use the switch at the STANDARD position if the unit is to be used with a regular amplifier. Otherwise, the amplifier and/ or speakers may be damaged. * Even when the unit has been connected with an amplifier that supports Super Audio CDs, change the switch to the STANDARD position when recording Super Audio CD sound on a tape deck, for instance. * Do not change the switch setting while the unit is in standby mode. Doing so could generate electronic noise that could damage your speakers, etc. * To turn off the timer, press STOP button for 2 seconds. ("Timer Off" will be displayed.) w Load a disc and turn into stand-by mode. * If program play has been set, program play will begin upon the timer on. 16