Marantz SR7001 User Manual - Page 60
Operation Of The Multi Room Outputs, With The Remote Control From Multi
View all Marantz SR7001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
OPERATION OF THE MULTI ROOM OUTPUTS WITH THE REMOTE CONTROL FROM MULTI A Room A output can be operated from a room where the receiver is not installed. This requires a separately sold IR receiver. (For connections, see page 12.) M 1. D1 D2 D3 USE PAGE 1 2 3 4 D4 D5 1. TV DVD VCR DSS TUNER CD CD-R MD TAPE 1 AUX1 AUX2 LIGHT RC8500SR Learning Remote Controller AMP 2 1. USE PAGE 2 4 D4 D5 CH VOL OK PREV MENU TEST 1 7.1CH 4 LIP.SYNC GUIDE CH.SEL 2 ATT 5 MUTE EXIT SURR 3 SPK-AB 6 2. 2. 1. Press MULTI on the multi room remote control from the MULTI ROOM. (Press the AMP button and press the > button until PAGE 4 is displayed. Press the MULTI (D1) button.) This operations will put the SR7001 into multi room mode and "MULTI" will be illuminated on the display. MULTl ROOM Video out put will show OSD information for the MULTI ROOM setup. MULTI ROOM A VIDEO :DSS AUDIO :FM 102.00MHz SLEEP :90 min MONO/ST:STEREO MULTI:OFF VOL :VARI LEVEL:-90dB MAPKR:OFF VOL :VARI LEVEL:-90dB --- MAIN ROOM STATUS --- VIDEO:DVD AUDIO:DVD RETURN BACK EXIT 2. Press the VOL+ or VOL− button on the multi room remote control to set the desired volume. 3. In multi room mode, the multi room remote control can be used in the multiroom to operate the following functions. General: Controlling volume level, sleep timer, and muting. SeIecting input audio and video source. Tuner: Selecting band, controlling preset channel up and down, tuning up and down direct frequency call. Notes for the Multi Room System • The MULTI ROOM OUT (MULTl OUT/MULTI SPEAKER) has analog outputs. This does not support digital input signals. • If the Tuner (FM, AM or XM) is active in the main room, you can not control any function of the tuner. In this case, You must listen to the same station as the main room. • When the component with RC-5 bus is connected to the MULTI RC IN jack(see page 20), Multiroom A can be operated using the RC codes for the main room. The remote control units of other Marantz products can also be used to control multiroom A. (Room B output cannot be operated from another room.) 57 ENGLISH