Marantz SR9200 User Guide - Page 23

ENGLISH 3. Tap Macro button. Macro screen appears. 8. Tap Start. The HOME screen appears with the 'Recording' label at the top of the screen. The buttons you tap on this screen will not be recorded. From the HOME you can go to the different devices or you can press the Extra hard button to go to the Extra screen with delays and beeps. 4. Press and hold the Mode button for 3 seconds. The Mode screen appears. 5. Tap Macro on the Mode screen. A message screen appears. RC3200A is now in Macro Mode. 9. Tap the button of the device you want to go to. The device screen appears. 6. Tap Next. The device screen with the Macro label appears. 10. Tap the soft or hard buttons with the commands you want to record. 11. Press the Page Up and Page Down buttons to go to different screens of the same device or press the Home button to go to the HOME screen again. 12. To add delays and beeps to the macro, press the Extra hard button on the HOME screen. The Extra screen appears. With the Page Up and Page Down buttons you can go to other screens of the selected device. 7. Tap the soft button you want to select as a macro. A message screen appears. 1) To add a delay, tap one of the Delay buttons. By tapping several Delay buttons, the duration of the delay will be increased. 2) To add a beep, tap the beep button. 3) Press the Home button to go to the HOME screen again. 19