Maytag HRN11250X User Guide - Page 6

ACCESSORIES AND TOOLS NEEDED Accessories To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories depending on your type of installation. Call Maytag Customer Service at 1-800-788-8899 for an authorized installer. EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLONS (7.6 LITERS), Part No. 66001013 AND 5 GALLONS (18.9 LITERS), Part No. 66001014 CAPACITY. DRAIN PANS AVAILABLE IN 22" (559 mm) DIAMETER (PART NO. 66001011) FOR WATER HEATERS HAVING A DIAMETER 20" (508 mm) OR LESS, 24" (610mm) DIAMETER (PART NO. 66001105) FOR WATER HEATERS HAVING A DIAMETER 22" (559 mm) OR LESS AND 28" (711 mm) DIAMETER (PART NO. 66001012) FOR WATER HEATERS HAVING A DIAMETER 26" (660 mm) OR LESS. Tools You may or may not need all these tools, depending on your type of installation. These tools can be purchased at your local hardware store. • Pipe Wrenches (2) 14" (356 mm) • Screwdriver • Tin Snips • 6' (1.82 m) Tape or Folding Ruler • Garden Hose • Drill • Pipe Dope or Teflon Tape DRILL SLOT-HEAD SCREWDRIVER PHILLIPS SCREWDRIVER TIN SNIPS Additional Tools Needed When Sweat Soldering • Tubing Cutters or Hacksaw • Propane Tank • Soft Solder • Solder Flux • Emery Cloth • Wire Brushes TUBING CUTTER PROPANE TORCH ROLL OF TEFLON TAPE (USE ONLY ON WATER HEATER CONNECTIONS) PIPE DOPE (SQUEEZE TUBE) USE FOR WATER AND GAS CONNECTIONS HACKSAW ROLL OF EMERY CLOTH GARDEN HOSE 6 FOOT TAPE PIPE WRENCH 3/4" (19 mm) WIRE BRUSH ROLL OF LEAD-FREE 1/2" (13 mm) WIRE BRUSH SOFT SOLDER 6 SOLDER FLUX