Maytag MDB7959SK Owners Manual - Page 4
Dishwasher Loading Tips
View all Maytag MDB7959SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
DISHWASHER LOADING TIPS NOTE: Features are model specific. Your dishwasher may not have all features described. See Quick Start Guides for possible dishwasher loading patterns for all dish racks. Silverware Baskets Sliding Bowl Tines Style 1 Style 3 Style 2 Use silverware basket lids to provide optimal spacing and best cleaning performance. NOTE: If your silverware does not fit into the designated slots, open the lids (Style 1/3) or lift on the ends of the lids and pull to remove (Style 2). Mix silverware types to keep them separated. Load knives down, forks up, and alternate spoons for best cleaning results. Removing Upper Racks In order to make space for tall items, your upper racks are removable. The manner in which to remove will depend on whether the rack is mounted with Style 1 or Style 2. Remove dishes prior to removing any racks. The sliding bowl tines allow you to easily load bowls of multiple sizes. Grab the moveable tine row in the lower rack and slide into the desired position. Fold Down Tines Style 1 To remove the rack, pull the rack forward about halfway out of the tub. On one side, press the tab on the track in and pull up the front end of the rack, out of the track. Then repeat this step on the other side to completely remove the front end of the rack. Then remove the rack by pulling the back end out using a forward and upward motion. To replace the rack, Push back of rack into rail first and then push front down. Fold down tines allow you to optimize the spacing in the rack. Fold down tines might be in the lower rack , the second level rack and/or third level rack depending on your model. To fold or unfold the tine, hold the tine nearest the clip at the end of the tine row and gently push it past the stop on the clip and in the direction you want to fold it. Stemware Holder Use the stemware holders to support wine glasses and other stemware. Push them up to rotate them out of the way when not needed. Stemware Holder Rack Track Stop Style 2 To remove the rack, pull the rack out until it stops. On the left and right side of the rack, push the plastic track stops on the front of the rail sideways to open them. Pull out the rack. To replace the rack, push the rack back onto the rails. Push the track stops closed. Cup Shelf Use the cup shelf to hold additional cups or small items. Push up to fold out of the way when not needed. 4