Maytag MDD8000AWS Installation Instructions - Page 13
Install Trim Pieces and Level Dishwasher - 2 drawer dishwasher
UPC - 883049140759
View all Maytag MDD8000AWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
WARNING 5. Reinstall electric box cover with all wires contained inside the terminal box. Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 3. Connect wires as follows using twist-on connectors sized to connect direct wire to 16 gauge dishwasher wire. Power supply wire: Terminal box wire: white white black black ground wire ground connector 4. Attach ground wire to the green ground screw. Install Trim Pieces and Level Dishwasher 1. Open bottom drawer. 2. Push in clips and slide rails back 5" (12.7 cm). A B A. Attach ground wire to green screw. B. Attach white and black wires. 3. Lift drawer off slide rails. Place drawer off to the left on covering. Slide rails into dishwasher. 11 2 2 4. Slide the dishwasher into position in the cabinet opening. Check to ensure that the drain hose and electrical wiring are not kinked. 13