Maytag MDD8000AWS Installation Instructions - Page 14
at the selected groove. Pull dishwasher back out of cabinet - 24
 |
UPC - 883049140759
View all Maytag MDD8000AWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5. Check left to right level by placing the level on the top of the drawer. Check front to back level by placing level on the slide rails. 8. Attach the toe kick bracket to the frame. 9. Place trim strip into toe kick bracket. 6. Adjust legs with a socket wrench to level the dishwasher. A 10. Attach toe kick bracket on the opposite side. A. Adjust legs. 7. Rest trim strip on floor and mark trim at the top of the frame flange height. Pick the closest groove to the mark. If the mark is between two grooves, choose the groove that makes the trim strip the shortest. On a covered surface, cut the trim strip at the selected groove. Pull dishwasher back out of cabinet opening about 6" (15.24 cm). 2 1 3 1 14
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
14
5.
Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
6.
Adjust legs with a
³⁄₁₆
" socket wrench to level the dishwasher.
7.
Rest trim strip on floor and mark trim at the top of the frame
flange height. Pick the closest groove to the mark. If the mark
is between two grooves, choose the groove that makes the
trim strip the shortest. On a covered surface, cut the trim strip
at the selected groove. Pull dishwasher back out of cabinet
opening about 6" (15.24 cm).
8.
Attach the toe kick bracket to the frame.
9.
Place trim strip into toe kick bracket.
10.
Attach toe kick bracket on the opposite side.
A. Adjust legs.
A
1
1
2
3