Maytag MED9700S Use and Care Guide - Page 12
connection, Power, Direct
View all Maytag MED9700S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4-wire connection: Power supply cord IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections. 3. Connect ground wire/green screw. Tighten screw. or [)are) of power supply cord to external ground conductor CD E G A. 4-wire receptacle eNEMA type 14+30R) B. 4-prong plug C. Ground prong D. Neutral prong E. Spade tern'linal_ with upturned ends F. Y+" ( 1.9 cn'l) Ut listed strain relief G. Ring tenTlinab 1, Remove center silver-colored terminal block screw. 2. Remove neutral ground wire from external ground conductor screw. Connect neutral ground wire and the neutral wire (white or center wire) of power supply cord under center, silver-colored terminal block screw. Tighten screw. A. External ground conductor screw B. Ground wire (green or bare') of power supply cord C. Y+" ( 1.9 cm) UI listed strain relief D. Center silver-colored terminal block screw E. Neutral ground wire" I. Neutral wire (white or center wire') 4, Connect the other wires to outer terminal block screws. Tighten screws. !! !! A. Fxternal ground conductor screw - Dotted line shows position of NEUTRAL ground wire" before being moved to center silvercolored terminal block screw. B. Center silver-colored tenTlinal block screw C. Neutral ground wire D. Neutral wire (white or center wire') E. Y+" (t.9 cm) UI li_ted strain relief 5. Tighten strain relief screws. 6. Insert tab of terminal block cover into slot of dryer rear paneh Secure cover with hold- down screw. 7. You have completed your electrical connection. Now go to "Venting Requirements." 4-wire connection: Direct wire IMPORTANT: A 4-wire connection is required for mobile homes and where local codes do not permit the use of 3-wire connections. Direct wire cable must have 5 ft (1.52 m) of extra length so dryer can be moved if needed. 12