Maytag MMMF8030P Bump Out Kit Installation Instructions - Page 3

Parts Needed (Provided in the Bump Out Mounting Kit) Part Drawing Description Quantity Where can find? 13" ~ 14" L Bracket Bump Out Mounting Plate Folded Folded Mounting plate with L bracket unfold before installation 1 14" ~ 15" M and N Bracket M side for 14" (35.6 cm) ~ 141⁄2" (36.8 cm) depth N side for 141⁄2" 2 (36.8 cm) ~ 15" (38.1 cm) depth 15" ~ 16" P and R Bracket Wall Template P side for 15" (38.1 cm) ~ 151⁄2" (39.4 cm) depth R side for 151⁄2" 2 (39.4 cm) ~ 16" (40.6 cm) depth Wall Template 1 Bump out mounting kit Upper Cabinet Template Upper cabinet template for 13" (33 cm) to 16" (40.6 cm) depth 1 cabinet Bump Out Kit Installation Instruction Installation Instruction 1 Keep the mounting plate and cardboard template provided with the microwave oven for future use if necessary. Location Requirements Check the opening where the microwave oven will be installed. The location must provide: ■ Minimum installation dimensions. See the "Installation Dimensions" illustration. ■ Minimum one 2" x 4" (51 x 102 mm) wood wall stud and minimum 3/8" (10 mm) thickness drywall or plaster/lath within cabinet opening. ■ Support for weight of 150 lbs (68 kg) which includes microwave oven and items placed inside the microwave oven and upper cabinet. ■ Grounded electrical outlet inside upper cabinet. See the "Electrical Requirements" section. NOTE: Some cabinet and building materials are not designed to withstand the heat produced by the microwave oven for cooking. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damages. Special Requirements For Wall Venting Installation Only: ■ Cutout must be free of any obstructions so that the vent fit properly and the damper blade opens freely and fully. For Roof Venting Installation Only: ■ If you are using a rectangular-to-round transition piece, the 3" (76 mm) clearance needs to exist above the microwave oven so that the damper blade can open freely and fully. See "Rectangular to Round Transition" illustration in the "Venting Design Specifications" section on the Owner Manual on the product. 3