Maytag MMV4205BAQ Installation Instructions - Page 13

Installation Instructions MOUNT THE MICROWAVE OVEN FOR EASIER INSTALLATION SAFETY, WE RECOMMEND INSTALL THIS MICROWAVE AND PERSONAL THAT TWO PEOPLE OVEN. IMPORTANT: Do not grip or use handle during installation. NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord. NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf. IMPORTANT: If filler blocks are not used, case damage may occur from over tightening screws. NOTE: When mounting the microwave oven, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1-3. Do not pinch cord or lift oven by pulling cord. 1. Lift microwave, tilt it \ forward, and hook slots at back bottom edge onto four lower tabs of mounting plate. 2, Rota;ce front of oven up against cabinet bottom j 3, Insert a self-aligning screw through top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.) Be sure to keep power cord tight. Be careful not to pinch the cord, especially when mounting flush to bottom of cabinet. Cabinet Front Cabinet Bottom Shelf Filler Block T Equivalent to Depth of Cabinet Recess igning Screw Microwave Oven Top 4. Attach the microwave oven to the top cabinet. 5, Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw. 6, Tighten center screw completely. 7, Tighten the outer two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.) L 8, Install grease filters. See the Owner's Manual packed with the microwave. 13