Maytag MMV4205BAQ Installation Instructions - Page 7
Tools You Will Need, Mounting, Space - over the range microwave
View all Maytag MMV4205BAQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation Instructions TOOLS YOU WILL NEED # ! and #2 Phillips screwdriver ..... _j Pencil _and Ruler or tape measure straight edge (optional) Tin snips (for cutting damper, if required) Scissors (to cut template, if necessary) Electric drill with 3/16", _/2" and 5/8" drill bits Gloves Saw (saber, hole or keyhole) Stud finder or Hammer (optional) Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only) Safety goggles Level Duct and masking tape MOUNTING SPACE NOTES: Bottom edge of • The space between the cabinets must be cabinet needs 30" wide and free of obstructions. to be 33" or more from the • This microwave oven is for installation over cooking surface ranges up to 33" wide. • If you are going to vent your microwave oven to the outside, see Hood Exhaust Backsplash Section for exhaust duct preparation. • When installing the microwave oven beneath smooth flat cabinets be careful to follow the instructions on the top cabinet template for power cord clearance. 7