Maytag MVWB700VQ Use and Care Guide - Page 15

To restart the washer 1. Close the lid and press START/PAUSE. 2. To unlock the lid after the Add a Garment period, press START/PAUSEonce. Pressing POWER/CANCEL will cancel the wash cycle. YOu can stop the wash cycle and drain the tub by pressing the Power/Cancel button once. YOu can change Cycles, Modifiers, and Options anytime before Start/Pause is pressed. Not all Modifiers and Options are available for all cycles. m A short tone sounds when a change is selected. If you press and hold the End Signal option for more than five seconds, all valid beeps will be eliminated. To turn the signals back on, press and hold the End Signal button for five seconds. m Three short tones sound if an unavailable combination not be accepted. is selected. The last selection will m To return all options and modifiers to Factory Default, press POWER/CANCEl_, select Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, or Fabric Softener within 5 seconds. When done correctly, the 7-segment displays show "Fd" for 3 seconds and then unit returns to Standby Mode. Changing Cycles after pressing Start 1. Press POWER/CANCEL once to cancel the cycle. The washer will (]rain. 2. Select the desired wash cycle. 3. Select the desired Modifiers and Options. 4. Press START/PAUSE. The washer restarts at the beginning of the new cycle. NOTE: If you do not press Start/Pause within 5 minutes of pausing the washer, the washer automatically shuts off. Changing Modifiers and Options after pressing Start/Pause You can change a Modifier or Option anytime before the selected Modifier by choosing the desired Modifiers and/or Options. NOTE: An error tone will sound if your selection is unavailable. or Option begins To manually drain the washer and spin the load 1. Press POWER/CANCEL once to cancel the wash cycle and drain the washer. 2. Turn knob to select DRAIN & SPIN. 3. Press START/PAUSE. When the spin is complete, the lid unlocks. Items can be removed from the washer. These lights show which portion of the cycle is operating. They also indicate when you can add other garments to the wash load. fil wash rinse spin done II add a garment III clean washer reminder Indicator lights An indicator light shows which Cycle, Modifiers, and Options you have selected. Estlmated Time Remaining When a wash cycle is started, the estimated time remaining for the cycle, including drains, will be displayed. The time will count down to the end of the cycle. estimated time remaining fills and iiiiiiiIii ii i! Turn the knob to choose the correct wash cycle for the type of fabrics you are washing. When the knob points to a cycle, the cycle and Start/Pause indicator lights will blink. If the default settings for the Modifiers and Options are acceptable, you may press Start/Pause to begin the wash cycle. sheets normal wrinkle control ...!.i..... darks/colors whites super wash rapid wash hand drain & spin rinse & spin soa k washer with a_rSsh Preset Cycle Settings For ease of use, preset cycle settings provide the recommended fabric care settings for each cycle.