Maytag MVWB755YQ Use & Care Guide - Page 15
washes. See Cleaning Your Washer in Washer Maintenance.
![]() |
View all Maytag MVWB755YQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.maytag.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Solution Washer not performing as expected (cont.) Odors Monthly maintenance not done as recommended. Run the Clean Washer with AFFRESH™ cycle after every 30 washes. See "Cleaning Your Washer" in "Washer Maintenance". Unload washer as soon as cycle is complete. Not using HE detergent or using too much HE detergent. Use only HE detergent. Be sure to measure correctly. Always follow the detergent directions. See "Cleaning your Washer" section. Fabric Damage Sharp items were in pockets during wash cycle. Empty pockets, zip zippers, and snap or hook fasteners before washing to avoid snags and tears. Strings and straps could have tangled. Tie all strings and straps before starting wash load. Items may have been damaged before Mend rips and broken threads in seams before washing. washing. Fabric damage can occur if the washer Load garments in loose heaps evenly around the washplate. is tightly packed. Do not load garments directly over the center of the washplate. Use cycle designed for the fabrics being washed. Add only 1 or 2 additional garments after washer is started. Garment care instructions may not have been followed. Liquid chlorine bleach may have been added incorrectly. Always read and follow garment manufacturer's care label instructions. See the "Cycle Guide" to match your load with the best cycle. Do not pour liquid chlorine bleach directly onto load. Wipe up bleach spills. Undiluted bleach will damage fabrics. Do not use more than recommended by manufacturer. Do not place load items on top of bleach dispenser when loading and unloading washer. Incorrect dispenser operation Clogged dispensers or laundry products dispensing too soon. Liquid chlorine bleach not used in dispenser. Do not overfill dispenser. Overfilling causes immediate dispensing. Always select Fabric Softener option to assure proper dispensing. Load dispensers before starting a cycle. It is normal for small amounts of water to be remain in dispenser at the end of the cycle. Homes with low water pressure may result in residual powder in the dispenser. To avoid, select a warmer wash temperature if possible, depending on your load. Use only liquid chlorine bleach in the Bleach dispenser. 15
![](/manual_guide/products/maytag-mvwb455yq-use-care-guide-e01f44b/15.png)