McAfee M-2750 Product Guide - Page 16

Install the rails and ears on the chassis and rack, Mount the Sensor on a rack, Before you begin - quick start guide

Get McAfee M-2750 - Network Security Platform PDF manuals and user guides View all McAfee M-2750 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

3 Setting up the Sensor Position the Sensor Install the rails and ears on the chassis and rack Before you begin Before you install the rails and ears on the chassis, make sure that power is OFF. Remove the power cable and all network interface cables from the Sensor. Each rack-mounting rail and ear has holes that match up with holes in the chassis. You will need a screwdriver to secure the slotted panhead screws. Task 1 Verify that you have all the parts you will need: two three-in-one rails, two chassis ears, and fourteen slotted panhead screws. Each rail includes a rail that mount to the rack, a rail that slides into the mounted rail, and a rail that is attached to the chassis. 2 Disassemble the slide rail by pulling the inner rail out and pushing the side latch in to separate. 3 Attach the inner rail to the chassis by fastening it with the screws provided. 4 Attach the ear to each side of the chassis. 5 Mount the L-shape and external rail to your rack frame. The adjustable end of the L-shape rail is intended for placement at the back of your rack. Adjust the rail as needed for length. You are now ready to mount the Sensor in the rack. Mount the Sensor on a rack McAfee recommends rack-mounting your Sensors. The rack-mounting hardware included with the Sensors is suitable for most 19-inch equipment racks and telco-type racks. For maintenance purposes, you should have access to the front and rear of the Sensor. Before you mount the Sensor on the rack, make sure that power is OFF. Remove the power cable and all network interface cables from the Sensor. Because of the weight of the appliance, McAfee recommends that two people place the chassis into the rail cabinet. Insert the chassis into the rail cabinet and complete the rack-mounting of the Sensor by securing the rack mount ears to two posts or mounting strips in the rack. The ears secure the Sensor to two rack posts. Be sure to fasten the ears securely to the rack. You can also mid-mount the Sensor (optional). For details, refer to the corresponding Sensor Quick Start Guide. 16 McAfee® Network Security Platform M-2750 Sensor Product Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Install the rails and ears on the chassis and rack
Before you begin
Before you install the rails and ears on the chassis, make sure that power is OFF. Remove
the power cable and all network interface cables from the Sensor.
Each rack-mounting rail and ear has holes that match up with holes in the chassis. You will need a
screwdriver to secure the slotted panhead screws.
Task
1
Verify that you have all the parts you will need: two three-in-one rails, two chassis ears, and
fourteen slotted panhead screws.
Each rail includes a rail that mount to the rack, a rail that slides into the mounted rail, and a rail
that is attached to the chassis.
2
Disassemble the slide rail by pulling the inner rail out and pushing the side latch in to separate.
3
Attach the inner rail to the chassis by fastening it with the screws provided.
4
Attach the ear to each side of the chassis.
5
Mount the L-shape and external rail to your rack frame.
The adjustable end of the L-shape rail is intended for placement at the back of your rack. Adjust
the rail as needed for length. You are now ready to mount the Sensor in the rack.
Mount the Sensor on a rack
McAfee recommends rack-mounting your Sensors. The rack-mounting hardware included with the
Sensors is suitable for most 19-inch equipment racks and telco-type racks. For maintenance purposes,
you should have access to the front and rear of the Sensor.
Before you mount the Sensor on the rack, make sure that power is OFF. Remove the power cable and all
network interface cables from the Sensor.
Because of the weight of the appliance, McAfee recommends that two people place the chassis into the
rail cabinet.
Insert the chassis into the rail cabinet and complete the rack-mounting of the Sensor by securing the
rack mount ears to two posts or mounting strips in the rack. The ears secure the Sensor to two rack
posts. Be sure to fasten the ears securely to the rack.
You can also mid-mount the Sensor (optional). For details, refer to the corresponding Sensor
Quick
Start Guide.
3
Setting up the Sensor
Position the Sensor
16
McAfee
®
Network Security Platform
M-2750 Sensor Product Guide