Memorex 32022378 User Guide - Page 3

c) Select "Control Panel". d) Select "Mouse" icon. e) Select "General". f) Select "Change". g) Select a new mouse driver that meets your new requirements. The new setting will over-ride the old ones. 4. Switching Mouse Mode 4-1.Switching Mouse Hardware Modes (Use mode switch) The Serial Mouse is capable of operating either as a Microsoft Serial Mouse or a Mouse Systems Mouse. At the base of the Mouse you will find a slide switch. The switch has two possible positions, 'MS' and 'PC' When the switch is set to the 'MS' position the Mouse will emulate a two-buttoned Microsoft Mouse while setting the switch to the 'PC' position will cause the Mouse to emulate a three-buttoned Mouse Systems Mouse. 4-2.Switching Mouse Hardware Modes (None mode switch) As mentioned earlier, the serial mouse is capable of operating either as a Microsoft Serial Mouse or a Mouse Systems Mouse. Which of the two modes the mouse will operate in is determined on the power-on initialization. If any one of the three buttons is depressed during power-on initialization, the mouse will emulate Mouse Systems Mouse. If none of the buttons are depressed during power-on initiation the mouse will emulate Microsoft Mouse. 4-3.Microsoft Mode When the mouse is in Microsoft mode, only the left and right buttons are Active the middle button is inactive. In this mode, your mouse will correctly emulate a Microsoft Serial Mouse. 4-4.Mouse Systems Mode If you are a user of AUTOCAD or any other software which gives enhanced performance with a Mouse Systems Mouse you should choose this emulation. A Mouse Systems Mouse operates with all three buttons. Note: Because Windows 95/98/NT/2000/ME support serial 'MS' mouse mode, you