Memorex MLT1522 User Guide - Page 6

POWER SOURCE When using a 3-pronged plug To operate the unit using AC power, connect the AC adapter (included) to the 12V IN jack DC 12V IN jack (z) on the rear of the unit. Connect the AC cord to the adapter and connect the other end to a wall outlet having 120V AC, 60Hz only. NOTE: The AC adapter is located at the rear of the base stand. 3-pronged Receptacle FRONT LOCATION OF CONTROLS 123 4 56 3-pronged plug Receptacle Box Cover 7 8 9 1011 12 1. VOLUME Down/Navigation Left Button-Press to lower the volume or navigate left in the setting menu. 6. CHANNEL/NAVIGATION Up Button-Press to select a higher-numbered channel or navigate up in the setting menu. 2. MENU/ENTER Button-Press to access the on- 7. Left Speaker screen menu or press to enter the setting. 8. Screen 3. VOLUME UP/Navigation Right Button-Press to 9. Base Stand (AC jack at rear of base) raise the volume or navigate right in the setting menu. 10. REMOTE SENSOR 4. POWER Button-Press to turn the TV on; the POWER indicator will light orange. Press again to 11. POWER Indicator-Lights orange when the unit is on, and lights red when the unit is off. turn the TV off; the POWER indicator will light red. 12. Right Speaker 5. CHANNEL/NAVIGATION Down Button-Press to select a lower-numbered channel or navigate down in the setting menu. 5